CAM TOOL KIT-FORD 3.5L,3.7L,4.0L ENGINE
Product Introduction
NOTE: The camshaft holding tool will hold the camshafts
in the Top Dead Center (TDC) position.
1. Rotate the engine to No. 1 TDC.
2.Install the 636-0001F-1 on to the flats of the camshaft.
3. Perform camshaft service as required.
4. Refer to the vehicle service manual for the correct
camshaft to crankshaft timing procedure.
1. Insert the 636-0001F-2 through the hole in the top of the mega cap.
2. Compress the secondary timing chain tensioner and install the 636-0001F-2 in the hole on the
rear of the secondary timing chain tensioner guide. Position the Chain Tensioner Hold Down Tool
against the mega cap to retain the tensioner in the compressed position.
3. Perform service to secondary timing chain as required according to vehicle service manual.
Application:
2007 - 2014 3.5L Edge
2011 - 2014 4.0L Edge
2011 - 2014 3.5L Explorer, F-150
2011 - 2014 3.7L F-150, MKX
2011 - 2012 4.0L F-150, MKX, Mustang
2012 - 2014 3.5L Flex
2010 - 2012 3.5L Fusion Hybrid
2007 - 2011 3.5L Milan
2010 - 2014 3.5L MKS, MKT
2009 - 2014 3.7L MKS
2010 - 2014 3.7L MKT
2007 - 2012 3.5L MKX, MKZ
2013 - 2014 3.7L MKZ
2011 - 2014 3.7L Mustang
2008 - 2012 3.5L Sable
2008 - 2014 3.5L Taurus, Taurus X
